パラメトリックスタディ機能に対応する項目
SimScaleはパラメトリックスタディに対応しており、特定の項目に値を複数指定し、同時実行できます。結果表示でも、値を振ったパラメータを横軸としたグラフを自動的に出力できます。
以下の項目については複数の値を指定するパラメトリックスタディ機能を使用できます。
- Velocity inlet: volumetric or mass flow rate
- Velocity inlet: fixed value for velocity
- Rotating zones: rotational velocity
- Inlet conditions (velocity, pressure, etc.): fixed temperature value
- Natural convection inlet-outlet: ambient temperature
- Velocity outlet: volumetric or mass flow rate
- Velocity outlet: fixed value for velocity
- Pressure inlet: fixed or total pressure
- Pressure outlet: gauge or mean pressure
- Power source: absolute or specific power source value
- Momentum sources: average velocity
- Centrifugal force: rotational velocity
なお、複数のパラメトリックスタディを同時に設定できません。
パラメトリックスタディの手順
1. 境界条件の設定パネルのパラメトリックスタディ アイコンをクリックします。
図1: パラメトリックスタディボタン
2. テーブル形式でパラメータ値を設定します。
図2: パラメトリックスタディでの値の指定
3. Simulation Runs から計算を開始してください。すると、指定した値を用いた解析が同時に実行されます。